Please update your browser:

Your web browser Internet Explorer 11 is outdated and no longer supported.

The display of content and functionality is not guaranteed.

 36 months warranty for MASTER spindles with unlimited spindle hours

36 months warranty for MASTER spindles with unlimited spindle hours

The motor spindles in the “MASTER” series from the DMG MORI component portfolio now excel with a failure rate of less than 1%. By extending the warranty to 36 months the company has now officially declared these impressive benefits part of the programme. 

As the interface between machine and tool, the motor spindles have an enormous impact on the precision and surface quality of workpieces. Their stability and long-term accuracy also have an immediate effect on the reliability and utilisation rate of machine tools. 

Warranty with no runtime limitation 

Reasons enough for DMG MORI not to leave anything up to chance: not in its own spindle production plants in Iga and Pfronten, nor from the point of view of the customer. 

For all new orders, DMG MORI spindles in the “MASTER” series therefore have a 36-month warranty. “And what’s more, with unlimited spindle hours”, as Alfred Geißler, Managing Director of DECKEL MAHO Pfronten, stresses before going on to point out other design improvements. The rigidity of the spindles has been increased by 15% and the dynamic load rating improved by an impressive 30%. At the same time, thermal displacement has been reduced by 40% with true running accuracy enhanced from 5 to 3µm. 

New performance promise for more than 95% of all DMG MORI machines

A glance at DMG MORI’s order statistics indicates the extent of the new performance promise. Over 95% of all the Group’s metal cutting machines are equipped with motor spindles from the “MASTER” series. “The majority of these originate from our large production locations in Iga and Pfronten, where respectively 7,000 and 4,000 of these high-tech spindles are produced each year”, explains Alfred Geißler proudly. 

Technology partnership as the basis of success

However, as an experienced technician he also stresses the importance of suppliers to the innovative DMG MORI production process. With regard to the “MASTER” spindles, he points in particular to the new spindle bearings from technology partner Schaeffler Technologies, which have opened up new possibilities for DMG MORI in the structural design of its motor spindles.

New material for spindle bearings

The combination of a generously dimensioned bearing design with the high-performance roller bearing material Vacrodur is what makes these so special. Vacrodur has significant benefits compared to the traditional material 100Cr6, Alfred Geißler tells us. Its high hardness values of up to and even more than 65 HRC are especially outstanding. Overall, this innovative steel exhibits extremely high load carrying capacity, resistance to wear and thermal stability.

New benchmarks in damage statistics

That is why Alfred Geißler is convinced that the current failure rate of 1% can be even further reduced with the new generation “MASTER” spindles. “Currently there are very few spindle failures and these are caused by wear, insufficient lubrication and contamination of the bearing. We will achieve new benchmarks with the Vacrodur bearings by improving all these issues.”

Machines with MASTER spindles

Overview of MASTER spindles

Milling spindles
Turn-mill-spindles
Turning spindles

Milling spindles

speedMASTER 15,000 (SK40 /HSK-A63) 

  • 15,000 rpm // 21 kW // 111Nm 
  • 15,000 rpm // 46 kW // 200Nm 

speedMASTER 20,000 (SK40 /HSK-A63) 

  • 20,000 rpm // 35 kW // 130Nm 

speedMASTER Aerospace 15,000 (SK50 /HSK-A100) 

  • 15,000 rpm // 100 kW // 179Nm 

 speedMASTER Aerospace 30,000 (SK40 /HSK-A63) 

  • 30,000 rpm // 79 kW // 59Nm

powerMASTER 1,000 (SK50 /HSK-A100) 

  • 9,000 rpm // 77,5kW // 1,000Nm 

5X torqueMASTER (SK50 /HSK-A100) 

  • 8,000 rpm // 37 kW // 1,300Nm 
  • 8,000 rpm // 52 kW // 1,800Nm

Turn-mill-spindles 

compactMASTER (SK40 /HSK-A63) 

  • 12,000 rpm // 22 kW // 120Nm 
  • 20,000 rpm // 22 kW // 120Nm

compactMASTER (SK50 /HSK-A100) 

  • 12,000 rpm // 36 kW // 220Nm

Turning spindles

turnMASTER 

  • 6″ chuck: 7,000 rpm // 11 kW // 70Nm 
  • 8″ chuck: 5,000 rpm // 32 kW // 360Nm 
  • 10″ chuck: 4,000 rpm // 26 kW // 525Nm

DMG MORI Spindle Service